Furniture Assembly & TV Mounting in Los Angeles

The two things people get wrong

Anchoring. A 65 inch television on a full-motion arm puts several hundred pounds of dynamic load into the wall when it swings. Drywall anchors are not rated for that. We locate framing, and where the studs do not line up with the mount we install a backer or use rated toggles designed for the actual load.

Cable management. A beautifully mounted television with a bundle of cables hanging beneath it looks unfinished. We install a recessed in-wall power kit and low-voltage pass-throughs so nothing is visible.

What we install

• Flat-panel TV mounts - fixed, tilting and full-motion - on drywall, plaster, brick, stone and over fireplaces
• In-wall power relocation kits and low-voltage conduit for HDMI and network cable
• Soundbars, centre speakers, in-wall and in-ceiling speakers
• IKEA, Wayfair, Article and Restoration Hardware flat-pack furniture
• PAX, SEKTION and BESTA systems anchored and scribed properly
• Floating shelves, picture ledges and gallery walls laid out with a laser
• Heavy mirrors, artwork and canvases
• Cribs, bunk beds, changing tables and anti-tip furniture anchoring
• Desks, standing desks, treadmills, exercise equipment and home gym racks
• Curtain rods, blinds, shades and motorised roller shades
• Baby gates, grab bars and safety hardware

Why this is cheaper than it looks

Most people book this as a single item and pay a minimum. Batch it. A technician who is already on site can mount your television, assemble the console, hang the gallery wall and install the blinds in the same visit for far less than four separate calls.

Cost

Standard TV mount on drywall with concealed cables starts at $120. Over a fireplace or on brick, plaster or stone runs $220 to $450 because of the substrate and the height. Flat-pack furniture is priced per unit or by the hour, whichever is lower for you.

• Stud and framing location, plus backer installation where needed
• Laser levelling and layout
• Rated hardware appropriate to the actual load and substrate
• In-wall power kit and low-voltage cable concealment on request
• Device connection and basic setup
• Anti-tip anchoring on tall furniture
• All packaging and cardboard removed and recycled
• Wall touch-up if we have to relocate a hole

Can you mount a TV over my fireplace?

Usually yes. We check the substrate, the heat exposure and the viewing angle, and we will tell you if the height will be uncomfortable before we drill.

Can the cables be hidden inside the wall?

Yes, using a code-compliant recessed power kit plus low-voltage pass-throughs. Running an extension cord inside a wall is a code violation and a fire risk, so we do not do that.

Do you take the boxes away?

Yes, all packaging is removed.

Do you assemble any brand?

Any flat-pack. Send us the product link and we will confirm the time before booking.