Opening hours

Mon to Sun: 8.00AM - 8.00 PM

Fix Brothers company logo with illustrated workers holding tools.

Installation of kitchen fixtures

Installation of kitchen fixtures and fittings as part of a kitchen update. The scope covered fitting and connecting the sink and mixer, installing the associated hardware, and checking every connection under pressure before signing off. Kitchen fixture work is where small mistakes become expensive: a mixer tail that is cross-threaded or a waste trap that is not properly seated will leak slowly into the cabinet base and destroy it from the inside. We also check the isolation valves while access is open. Old gate valves that have seized are the reason a minor future repair turns into a whole-house shut-off. We install sinks, mixers, disposals, filters, cabinet hardware and appliances, either as a standalone job or as part of a wider kitchen remodel.

Project scope

This job covered kitchen fixtures and fittings installed as part of a kitchen update. Our crew fitted and connected the sink and faucet, installed the associated hardware, and checked every connection under pressure before signing off.

While access under the sink was open, we also checked the shutoff valves. Old valves that have seized are the reason a minor repair years later turns into shutting off water to the whole house.

How we approach sink and faucet installation

Fixture work is where small mistakes get expensive. A cross-threaded faucet connection or a trap that is not fully seated will drip slowly into the cabinet base and ruin it from the inside.

  • Confirm the new sink and faucet suit the countertop cutout and hole pattern.
  • Shut off, drain and remove the old fixtures without stressing the supply stubs.
  • Replace tired shutoff valves and supply lines instead of reusing them.
  • Set the sink with the correct sealant and clips, then assemble the drain and trap by hand before final tightening.
  • Pressurize, fill the basin, release it and watch every joint with a dry hand and a light.

What to know before a similar job

Buy fixtures before the visit, and check what is in the box. Faucets do not always ship with supply lines, and disposals may need a cord kit or a dishwasher knockout removed. If you are changing from a drop-in sink to an undermount, that is a countertop question first, so bring it up early.

Replacing a sink or faucet in the same location is ordinary repair work. Moving the plumbing to a new position is a bigger job that belongs in a remodel scope. We install sinks, faucets, disposals, water filters, cabinet hardware and appliances, either as a standalone visit or as part of a wider kitchen remodel.

Related services

Send the fixture models you have picked and we will reply with a free written estimate for installation.

‍