Installation and connection of a dishwasher into an existing kitchen cabinet run. The job covered removing the old unit, adapting the opening, connecting the water supply, waste and electrical, levelling the machine and securing it to the cabinetry so it does not tip when the loaded door is opened. The drain hose was fitted with a high loop, which is the detail most commonly missed and the reason a dishwasher backs up dirty water into the tub. We pressure-tested the connection and ran a full cycle before leaving, checking for leaks at the inlet, the waste and the door seal. We install and replace dishwashers, disposals, ranges, hoods, washers and dryers. Doing it properly costs little more than a delivery-crew swap and avoids the cabinet damage that follows a slow leak.
We installed and connected a dishwasher in an existing kitchen cabinet run. The job covered removing the old unit, adapting the opening, connecting water supply, drain and electrical, leveling the machine and securing it to the cabinetry so it cannot tip when the loaded door is opened.
The drain hose was routed with a high loop. It is the detail most often missed, and the reason a dishwasher ends up with dirty sink water sitting in the tub. We pressure-tested the connection and ran a full cycle before leaving, checking the inlet, the drain and the door seal for leaks.
A delivery-crew swap and a careful install look the same on day one. The difference shows months later, as a swollen cabinet side or a warped floor.
Check how the drain is protected against backflow. California's plumbing code generally calls for an air gap fitting at the sink, so if your countertop has none, tell us and we will look at the options on site.
Also confirm the shutoff valve under the sink works and that the unit has a proper power connection, whether plug or hardwired. Our handyman crew installs and replaces disposals, ranges, hoods, washers and dryers on the same visit if needed.
Send the model number of the new dishwasher and ask for your free written estimate.