Opening hours

Mon to Sun: 8.00AM - 8.00 PM

Fix Brothers company logo with illustrated workers holding tools.

Accent wall installation

This project covered the design and installation of a decorative accent wall in a residential living area, taking the wall from plain painted drywall to a finished feature surface. Preparation is most of the job. We removed the existing trim, checked the wall for bow and level, and corrected the substrate before installing the new material. Where a wall is out of plumb, panelling installed straight to it will show a tapering gap at the ceiling, so shimming and scribing at this stage is what makes the finished result look built-in. Once the material was fixed, joints were filled, caulked at the perimeter, primed and painted. Trim was reinstalled and the room cleaned down. Accent walls suit living rooms, bedrooms and home offices, and are a practical option for renters and owners who want a visible change without construction work.

Project scope

This project took a living-area wall from plain painted drywall to a finished decorative feature surface, covering both the design and the installation. Our crew removed the existing trim, checked the wall for bow and level, corrected the substrate, and only then installed the new material.

After the material was fixed, joints were filled, the perimeter was caulked, and the wall was primed and painted. The trim went back on and the room was cleaned before handover.

How we approach applied accent walls

Paneling and molding follow whatever they are fastened to. If the wall leans, a panel installed tight to it shows a tapering gap at the ceiling, so we fix the wall first and decorate second.

  • Pull baseboard and casing carefully so it can be reused where it is in good shape.
  • Check plumb and flatness with a long level and mark the high and low spots.
  • Shim behind the material and scribe edges to the ceiling and side walls.
  • Fasten into studs or added blocking, never into drywall alone.
  • Fill joints and nail holes, caulk the perimeter, then prime before paint.

What to know before a similar job

An accent wall is a good fit when you want a visible change without opening walls or moving anything mechanical. It suits living rooms, bedrooms and home offices. Owners can go as permanent as they like; renters should get the landlord's approval in writing, since the work involves fasteners and paint.

The main decision is the material and pattern: board-and-batten, flat panels, picture-frame molding or a textured product. Each one changes how outlets, switches and vents get handled, so point those out at the estimate. Cosmetic wall finishes like this do not normally need a permit.

Related services

Have a wall and a rough idea? Request a free written estimate and we will help you settle on a layout that fits the room.

‍